Prophete INDEX-14, Руководство по эксплуатации, Страница: 113 / 444

Eng
lish
EN 21
HANDLEBAR
FOLDING STEM
FOLDING IN THE HANDLEBARS
1. Undo the wing screw
55
on the handlebar stem.
2. Swivel the handlebar stem to the side.
FOLDING OUT THE HANDLEBARS
1. Fold the handlebar stem onto the steer tube. Make sure
that the clamp piece
54
is positioned in the designated
recess.
2. Tighten the wing screw
55
firmly.
ALIGNING THE HANDLEBARS
1. Fold down the handlebars as described in the Folding the
handlebars chapter
2. Undo the now visible hexagon head screw
56
with a 6-mm
Allen wrench. The screw only needs to be undone slightly.
3. Set the handlebars on the steer tube and adjust the positi-
on as desired.
4. Fold down the handlebars as described in the chapter 'Fol-
ding in the handlebars'.
5. Now tighten the hexagon head screw
56
firmly (see Torque
specifications chapter).
6. Fold down the handlebars as described in the chapter 'Fol-
ding out the handlebars'.
ADJUSTING THE HANDLEBAR ANGLE
1. First undo the clamping block screws
57
of the handlebar
attachment with a 5-mm Allen wrench.
2. Adjust the incline angle of the handlebars.
3. Retighten the clamping block screws
57
firmly (see chapter
Torque specification).
4. Turn the handlebar attachment parts (e.g. brake lever) back to
their initial positions.
54 55
57
56