don’t tHrow away
tHe Boxes!!!
open page - top secret
6
5
carefully remove the top cover of the box and the
acrylic window from the packaging, and place them
somewhere safe. to free the ship from the support,
gently pull up on the body of the ship and release
the motors from the rubber grommets. slowly pull
the ship away from the surface of it
’
s support,
making sure not to force it.
important note: for packaging and display purposes
the propeller blades are not pre-installed on the
ship. you will need to follow the instructions for
installing propeller blades on page 10.
when the cover is removed, the inside display case
will come to life with light and music.
note: each time you replace the cover of the box
and open it, a new music track will play.
to recharge the display case, first remove the
acrylic top. this will give you access to the
display charging port in the back side of the
display fixture. use the included usB cable and
wall adapter. when the display is charging, the
sound and lights will turn off. when the battery
is fully charged, the display lights will turn on
again. now you are ready to replace the acrylic
top of your display box.
if you are unsure if the battery is charging,
remove the charging cable after several minutes of
charging and the display should light up. fully
charging the display case takes approximately 40-
60 minutes under normal conditions.
note: Be sure to disconnect the charging cable
once the packaging is fully charged to preserve
the battery.
when battery is low the lights will flash.
display case functions
removing tHe tie advanced
from tHe display case
veHicle stats
