7
1 -unscrew and slide
2 -4 aa batteries
3 -Put back cover
all tHe leds on tHe
controller sHould Be
flasHing
remote control Battery
installation
notes
1. on the back of the controller, unscrew and
slide off the battery cover.
- there is a screwdriver hidden in the right side
arm of the controller.
2. install 4 aa alkaline batteries (1.5v
rechargeable batteries are preferred) into the
controller.
- check proper orientation!
3. replace the battery cover and secure it with
screws.
4. replace the screwdriver into the side of the
controller.
5. turn over the controller and push the power
button for 2 seconds, and verify that the leds
flash.
use alkaline or 1.5v
recHargeaBle Batteries
