17
4 aa”batteries
Power on
100-foot radius
no rivers
good weather
100-foot
radius
speed 1
speed 3
speed 2
t-mode
preparing for fligHt
for multi-person play
Before beginning, ensure that all ships and
controllers are powered off. make sure that no
other 2.4gHz devices are in the area.
each person must sync their vehicle individually,
one at a time, in order to avoid interference.
follow steps on page 11 (
“
sync to sHiP: for
single-Person Play
”
), making sure to keep away
from others while ensuring that no one else is
syncing at the same time.
after one player syncs their vehicles, it should
be left on until all players have finished
syncing their own vehicles.
should a mistake or interference occur, all
players should turn off their controllers and
vehicles for 60 seconds and begin the process
again.
verify that the controller has 4“aa” batteries
and the ship
’
s battery is fully charged.
make sure your ship and controller are both
powered on.
operate in a large space, with an open radius of
at least 100 feet.
check the environment to ensure it has no
obstacles or a river. set your ship on a clean
flat surface before takeoff.
do not fly your sHiP during rain, snow, or Heavy
winds.
cHecklist
red
leds
- stop flashing
when
synced to vehicles
