Ultra Electronics Ltd
Pronto Maintenance Manual
- 31 -
The Soak Test Mode moves every mechanical part of the machine, including the Print Head cooling Fan. A blank Card
will be needed (inserted from the front).
There are two Soak Test Modes available on the Pronto (one with, and one without the Dye-Film fitted).
No Dye-Film fitted
Power up the Printer, open the Lid and remove the Dye-Film.
Press the Multicoloured Button (on the front Panel) twice in quick sucession until the Button colour changes.
Close the Printer Lid. The front Panel Button should now begin to flash.
Next, the Printer Rollers should start to turn.
Hand feed a Card into the Printer’s front Panel slot.
Dye-Film fitted
Performing a Soak Test with the Dye-Film fitted is essentially identical to the steps above (the main difference is that with
Dye-Film fitted, the Pronto prints a series of twenty four small squares onto the Card).
When all twenty four squares have been printed, the Printer exits the Soak Test Mode.
SECTION 9.2.1
SOAK TEST MODE