Pronomic PowerMake 600, Руководство пользователя

Страница: 31 / 40

11
12 - Panel UHF DUAL receiver
See 4 . integrated UHF radio receiver and radio microphones
13 - AUX output jack
This connector is designed as a 6.3mm balanced jack socket. You can tap the
signal of the AUX bus at this jack. You can use this signal to feed an active stage
monitor, for example.
14 - Output socket FX
This connector is a 6.3mm balanced jack socket. You can tap the signal of the FX
bus at this jack. You can use this signal to feed an external effects unit, for example.
15 -Input socket Return
This connector is designed as a 6.3mm balanced jack socket. You can connect an
external mono signal source to this jack, or return a signal picked up from the AUX
or FX jack to the signal path. The signal is routed directly to the return bus. This
connection is set to LINE level. Please note that the sound may be impaired if the
input signal is too high.
16 - Headphone output
Connect your headphones to this 6.3mm stereo output jack.
17 -Display
See 2. BT/USB Player/Recorder and 3. Integrated Effects Processor
18 - Effect processor control knob
See 3. Integrated effect processor
19 - Volume control of the FX bus
This knob determines the signal strength of the signal sent from the FX bus to the
FX jack and the internal effects processor. Turn the FX knob clockwise to increase
the signal strength and counterclockwise to decrease the signal strength.
20 - Volume control of the AUX bus
This control determines the signal strength of the signal routed from the aux bus to
the aux jack. Turn the AUX knob clockwise to increase the signal strength and
counterclockwise to decrease the signal strength.