Pronomic PowerMake 600, Руководство пользователя

Страница: 32 / 40

12
21 - Volume control of the return bus
This control determines the signal strength of the signal sent from the return bus to
the stereo sum. Turn the Return knob clockwise to increase the signal strength and
counterclockwise to decrease the signal strength. When mixing the return signal to
the stereo master, keep in mind that the CLIP LED (+10) of the level meter should
not light up during operation to avoid noise and damage.
22 - Volume control (fader) of the internal effects unit
This control determines the signal strength of the signal passed from the internal
effects unit to the stereo master. Move the FX knob up to increase the signal
strength of the mixed effect signal and down to decrease the signal strength. When
adding the effect signal to the stereo sum, keep in mind that the CLIP LED (+10) of
the level meter should not light up during operation, in order to avoid noise and
damage.
This control has no effect on the FX bus signal routed to the FX jack.
23 - Volume control (fader) of the MP3 bus
This control determines the signal strength of the signal passed from the internal
BT/USB player to the stereo sum. Move the MP3 slider up to increase the signal
strength of the relayed signal and down to decrease the signal strength. Note that
the CLIP LED (+10) of the level meter should not light up during operation to avoid
noise and damage.
24 - L+R Master control (fader)
Move the two Master faders up to increase the stereo output signal of the mixer. To
prevent damage to the following devices in the signal flow, always set the master
controls to the lowest position at the beginning and increase the volume gently to
the desired level. Please note that the CLIP LED (+10) of the level meter should not
light up during operation to avoid noise and damage.
25 - 7-Band EQ
Using the 7-band EQ, you can adjust the sound character of the stereo sum
according to your wishes to the external conditions and the sound characteristics of
the respective room or your speakers. Please note that boosting frequencies in the
7-band EQ also affects the signal strength of the stereo sum. The CLIP LED (+10)
of the level meter should not light up during operation, in order to avoid noise and
damage.
26 - LEVEL meter
This display informs about the signal strength of the stereo sum. The green LEDs
show the presence of a signal. The CLIP LED (+10) warns of overdriving, too high
signal level. Please note that the CLIP LED should not light up during operation, if
possible, to avoid noise and damage. In this case, move the volume controls of the
stereo sum (L+R Master controls), or the controls of individual channels down to
achieve a lower overall level.