Pronomic PowerMake 600, Руководство пользователя

Страница: 29 / 40

9
readjust the signal. If a PEAK LED lights up, immediately reduce the respective gain
level. To do this, turn the gain control of the corresponding channel
counterclockwise to reduce the signal strength.
8 - Pan control
When the Pan control is in its center position, the mono signal of the respective
channel strip is passed on to the stereo sum of the mixer in equal parts (L+R Master
control).
Turn the pan control clockwise from the center position to shift the signal of the
respective channel to the right side of the stereo image (R master control). Turn the
pan control counterclockwise from the center position to shift the signal of the
respective channel to the left side of the stereo image (L master control).
9 - Mute button
Press Mute to mute the signal of the respective channel. The Mute button interrupts
the signal flow to Main-Out, Aux, FX and Headphones.
10 - Volume control (fader) of the respective channel strip
Move the Volume knob up to increase the level of the respective channel. If the
CLIP LED (+10) of the stereo sum level meter lights up, the level is too high. Move
the slider down to decrease the level. Please note that the CLIP LED (+10) of the
level meter should not light up during operation to avoid noise and damage.
11 - PFL button
Press the PFL button to switch the signal of the respective channel directly to the
headphone output for pre-listening.
Attention: The PFL button sends the signal of the selected channel directly and
without reduction through the respective channel fader to the headphone output.
This can result in very high volume levels on the headphones. Before using the PFL
function, please turn the Phone knob all the way to the left and increase the volume
gently to a comfortable level.