PRONAR T743, Руководство оператора

Страница: 39 / 150

Pronar T743 SECTION 2
2.14
•
If during clutch operation an unusual, disturbing sound or vibration is noticed,
immediately stop machine.
•
Permissible loading and maximum revs may not be exceeded.
•
Do not exceed or reduce recommended connection pressures. In the event of
insufficient pressure the clutch slips, whereas excessively high pressure may
destroy the clutch. Equally application of short lasting high-pressure impact, e.g.
in order to remove blockages is forbidden.
•
On no account may oil or grease come in contact with abrasive surfaces, if they
do the clutch will not achieve the required rotation moment.
•
Abrasive coatings may not be cleaned with solvents, i.e. benzene, acetone or
kerosene. If the coating is contaminated with oil, it must be replaced.
•
Cleaning substances may not come into contact with the clutch.
•
The clutch may not be cleaned under running water, e.g. hose or nozzle jet with
hot steam stream.
•
Note: During maintenance and repair work there is a danger of burning by clutch,
which has heated up during work.
•
Attention should be given to the tightness of oil conduits and connections in
steering parts.
2.2 DESCRIPTION OF MINIMAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain minimal risk, which could lead to an accident, and this is connected mainly
with the actions described below:
•
using the trailer for purposes other than those for which it is intended,
•
being between the tractor and the machine while the engine is working and when
the trailer is being attached,
•
being on the machine while the engine is working,
•
operating the trailer with the safety guards removed or faulty,
•
not maintaining safe distance during loading or unloading of trailer,