PRONAR T743, Руководство оператора

Страница: 28 / 150

SECTION 2 Pronar T743
2.3
signalling lights, safety guards, correct mounting of conveyor and connected
hydraulic and brake system elements.
•
The trailer may only be used when all the safety guards and other protective
elements are technically sound and correctly positioned. In the event of loss or
destruction of the safety guards, they must be replaced with new ones.
•
When operating the machine wear protective gloves and use the appropriate
tools.
•
In the event of any fault or damage whatsoever, do not use the machine until the
fault has been corrected. The trailer must not be used when not in working order.
•
Assembly and disassembly of extension walls, the frame and tarpaulin cover, can
only be carried out with the use of appropriate platforms, ladders or from a ramp.
These fittings must be in good condition to fully protect the persons working on
them against falling. The above procedure should be performed by at least two
persons.
•
In the final phase of folding the tarpaulin cover, at all times hold with one hand the
railing of the fenced platform or top of the front frame. Non-compliance with this
rule can put the user at risk of falling.
•
While walking or standing on trailer or in the container do NOT use mudguards
and wheels etc. for this purpose. Steps and platforms are designed for use while
working on trailer. Trailer and agricultural tractor must at this time be immobilised
with parking brake, PTO shaft disconnected and the tractor cab closed and
protected against access of unauthorised persons. Trailer should be additionally
protected with the use of chocks.
2.1.2 HITCHING AND DISCONNECTING THE TRAILER
•
Be especially careful when hitching the machine. Ensure appropriate visibility and
check that persons assisting in hitching the machine are at a safe distance from
danger zone.
•
The trailer and tractor must not be attached if the hydraulic oil in the two
machines is of different types, the trailer drawbar is not compatible with the tractor