PRONAR T679/3 Скачать руководство пользователя страница 79

Страница: 79 / 117

SECTION 5

PRONAR T679/3 PRONAR T679/4

5.5

INSPECTION

Checking wheel axle bearings for slackness:

•

after travelling the first 1,000 km,

•

after intensive use of trailer,

•

every six months use or every 25,000 km.

Check condition of hub cover, if necessary replace with a new cover. Inspection of bearing

slackness may only be conducted when the trailer is hitched to tractor. The machine may not

be loaded.

DANGER

Before commencing work the user must read the user's manual for the lifting
jack and adhere to the manufacturer's instructions.

The lifting jack must be stably supported on the ground and the suspension
system rocker.

Make certain that the lifting jack is positioned in the rocker's axis of rotation and
that the trailer shall not move during inspection of half axle bearing slackness.

5.2.3 ADJUSTMENT OF SLACKNESS OF WHEEL AXLE BEARINGS

The wheel should turn smoothly without stiffness or detectable resistance. Adjustment of

bearing slackness may only be conducted when the trailer is not loaded and is hitched to the

tractor.

Ensure that the trailer is properly secured and will not move during wheel dismounting.

Take off hub cover (1), figure (5.3).

Take out cotter pin (3) securing castellated nut (2).

Содержание T679/3






















































































































Результаты поиска

Содержание T679/3

Отзывы:

PRONAR T679/3, Руководство оператора, Страница: 79 / 117

Результаты поиска

Содержание T679/3

Отзывы: