PRONAR T679/3, Руководство оператора, Страница: 103 / 117

SECTION 5 PRONAR T679/3 PRONAR T679/4
5.29
TABLE 5.5 Recommended lubricants
MARKING
ACCORDING
TO TAB. (5.3)
DESCRIPTION
A Machine general-purpose grease (lithium, lime).
B Grease for heavily loaded elements with addition of MoS
2
or graphite.
C Anti-corrosion and penetrating preparation in aerosol.
Empty grease or oil containers should be disposed of according to the recommendations of
the lubricant Manufacturer.
TIP
Number of lubrication points and subassemblies requiring lubrication specified
in table (5.4) LUBRICATION SCHEDULE depend on the trailer version.
Locations of grease nipples and areas requiring lubrication are indicated by
black arrows in figure (5.14).
5.6.1 CONSUMABLES
Hydraulic oil
Always adhere to the principle that the oil in the trailer hydraulic system and in the tractor
hydraulic system are of the same type. In the event of application of different types of oil
make certain that both hydraulic substances may be mixed together. Application of different
oil types may cause damage to trailer or tractor. In a new machine, the hydraulic system is
filled with L HL32 Lotos hydraulic oil.
In the event of necessity of changing hydraulic oil for another oil, check the recommendations
of the oil Manufacturer very carefully. If it is recommended to flush the system with the
appropriate preparation, then comply with these recommendations. Attention should be
given, so that chemical substances used for this purpose do not damage the materials of the
hydraulic system. During normal trailer use, change of hydraulic oil is not necessary, but if
required, this operation should be entrusted to a specialist service point.