PRONAR T679/3 Скачать руководство пользователя страница 69

Страница: 69 / 117

SECTION 4

PRONAR T679/3 PRONAR T679/4

4.15

•

While driving on public roads, the tailgate must be closed.

•

Please note that the braking distance of the tractor and trailer combination is

substantially increased at higher speeds and loads.

•

Monitor trailer's behaviour when travelling on an uneven terrain, and adjust driving

speed to road conditions, slow down early enough when turning.

•

Prolonged driving across steep ground may lead to loss of braking efficiency.

•

The trailer is designed to operate on slopes up to 8°. Driving trailer across ground

with steeper slopes may cause the trailer to tip over as a result of loss of stability.

Prolonged driving across steep ground may lead to loss of braking efficiency.

4.5 UNLOADING

The trailer is equipped with hydraulic tipping system and suitable frame structure and the

load box allowing tipping to the rear. Tipping of the load box is controlled from driver's cab

using external tractor hydraulic system selective control valve.

The trailer must be positioned to travel forwards and be hitched to the tractor. Unloading

should only take place when the trailer is placed on flat level surface and hitched to tractor.

DANGER

Ensure that during unloading nobody is in the vicinity of the unloading zone.

During work, keep a safe distance from overhead electric power lines.

Goods on pallets and bulk materials should be unloaded from the trailer using a loader,

conveyor or forklift truck. During work, ensure good visibility and exercise particular caution.

Immobilise tractor and trailer with parking brake. Just before unloading, remove all securing

elements (belts, ropes, etc.). Unloading the trailer should be carried out in accordance with

the general principles of workplace health and safety.

Unloading trailer is performed in the following sequence:

tractor and trailer must be placed to drive forwards on flat and hard ground,

immobilise tractor with parking brake,

Содержание T679/3






















































































































Результаты поиска

Содержание T679/3

Отзывы:

PRONAR T679/3, Руководство оператора, Страница: 69 / 117

Результаты поиска

Содержание T679/3

Отзывы: