PRONAR T679/3 Скачать руководство пользователя страница 61

Страница: 61 / 117

SECTION 4

PRONAR T679/3 PRONAR T679/4

4.7

Unhitching

In order to disconnect the trailer from the

tractor follow these steps.

Immobilise tractor with parking

brake, turn off tractor engine

Ensure

that

unauthorised

persons do not have access to

the tractor cab.

Place

chocks

under

the

trailer's wheels in order to

prevent the machine from

rolling.

Unfold the trailer's mechanical support.

Disconnect electric lead.

Disconnect braking system conduits.

If the trailer is equipped with a double conduit pneumatic system, first

disconnect the red conduit and then disconnect the yellow conduit.

If the trailer is equipped with a single conduit pneumatic system, first

disconnect the black conduit.

Disconnect hydraulic conduit of the hydraulic braking system from the

section of the manifold of the tractor's external hydraulic system.

Protect conduit ends with covers. Place conduit plugs in appropriate sockets.

Release tractor hitch, drive tractor away from the trailer.

4.2.1 HITCHING AND UNHITCHING THE SECOND TRAILER

A second trailer may only be hitched if it is a machine built on a dual axle chassis and if it

fulfils all the requirements specified in section 1. Hitching the second trailer to the tractor -

trailer unit requires experience in driving an agricultural tractor. While hitching the second

trailer, it is recommended to use the help of another person to guide the tractor driver.

Hitching the second trailer

FIGURE 4.1

Proper position of chocks

Содержание T679/3






















































































































Результаты поиска

Содержание T679/3

Отзывы:

PRONAR T679/3, Руководство оператора, Страница: 61 / 117

Результаты поиска

Содержание T679/3

Отзывы: