PRONAR T046H Скачать руководство пользователя

Страница: 60 / 116

Chapter 4

Terms of Use

4.4

PRONAR T046H

HEIGHT ADJUSTMENT OF THE TRAILER'S
DRAWBAR

• If the trailer is equipped with a hy-

draulic support, first connect the hy

draulic system conduit marked with

a sticker (1) - figure (4.4). Then

proceed in accordance with the
chapter

Hydraulic support

• In the event that the trailer is equipped

with a parking support with me-
chanical transmission, the adjustment
is carried out using the support trans-
mission - see

Mechanical support.

CONNECTING THE TRAILER TO THE
TRACTOR'S HITCH

• Reverse the tractor and connect the

trailer to the appropriate hitch.

• Check the coupling safety device

protecting the machine against acci-
dental disconnection.

• If an automatic coupling is used in

the tractor, make sure that the ag-
gregation operation is completed and
the drawbar eye is secured.

• Move the parking stand to transport

position.

• Switch off the tractor engine and

remove the ignition key. Secure the
tractor with the parking brake. Close
the tractor cabin and secure it against
unauthorized access.

CONNECTING THE BRAKING SYSTEM

•

Depending on the trailer configu

ration, connect the braking system
connectors to the appropriate tractor
sockets.

• Connect pneumatic system lines.

First, connect the yellow plug to
the yellow socket on the tractor,
and then the red plug to the red
socket on the tractor. After con-
necting the second conduit, the
brake release system will switch

DANGER

During coupling it is forbidden to stand bystanders

between the trailer and the tractor. The agricultur-

al tractor operator when connecting the machine

should make sure that bystanders are not in the dan-

ger zone during coupling.

Take care when connecting the trailer.

Ensure good visibility during coupling.

After completing the coupling, check the pin hitch

safety.

622-H.08-1

Figure 4.4

Hydraulic connection of the

support

(1) information sticker

Содержание T046H





















































































































Результаты поиска

Содержание T046H

Отзывы:

Похожие инструкции для T046H

Бренды по названию

Популярные бренды

PRONAR T046H, Руководство пользователя

Результаты поиска

Содержание T046H

Отзывы:

Похожие инструкции для T046H

Бренды по названию

Популярные бренды