PRONAR T046H, Руководство пользователя

Страница: 79 / 116

Chapter 5
5.9
PRONAR T046H
Periodic inspections
5.6 CHECKING THE TRAILER BEFORE DRIVING OFF
• Before connecting the trailer to the
tractor make sure that the hydraulic
and pneumatic conduits are not
damaged.
• Check the completeness, technical
condition and correct functioning of
the trailer lighting.
• Check the cleanliness of all electric
lamps and refl ectors.
• Before travelling on a public road,
remove the rear lamp covers and
place them in the designated place.
• Check the correct mounting of the tri-
angular plate holder for slow moving
vehicles and the plate itself.
• Make sure that the tractor has a re-
fl ective warning triangle.
• Check that the actuator ventilation
openings are not clogged with dirt
and that there is no water or ice
inside. Check the correct mounting of
the actuator.
Clean the actuator if necessary.
In winter, it may be necessary to
defrost the actuator and remove
accumulated water through un-
clogged ventilation holes. If any
damage is found, replace the
actuator. When mounting the
actuator, keep its original po-
sition relative to the bracket.
• Check the operation of the service
brake system when moving off. For
proper operation of the pneumatic
system, an appropriate level of air
pressure in the trailer's air tank is
required.
• Regularly check the correct oper-
ation of other systems during trailer
operation.
I.3.4.622.08.1.EN
DANGER
Driving with malfunctioning lighting or braking sys-
tems is prohibited.
In the event of damage to the trailer, discontinue use
until it is repaired.
622-I.06-1
Figure 5.4 Brake cylinder