PRONAR T046H, Руководство пользователя

Страница: 65 / 116

Chapter 4
4.9
PRONAR T046H
Terms of Use
4.4 LOADING
During loading the trailer must be con-
nected to the tractor. It is recommended
to place the trailer on a stable, flat surface
and block the vehicle by placing wedges
under the wheels and applying the hand-
brake. Animals to be transported should
be arranged as regularly as possible on
the entire surface of the trailer
REAR DOOR OPENING
To open the rear door, raise the bolt arm
(A), then turn the bolt to unlock the locking
hooks. The door should open easily. After
opening the door, secure it against acci-
dental closing with a lock.
HYDRAULIC LOWERING OF THE
TRAILER
Before lowering the trailer, make sure that
the cables are connected
the hydraulic suspension controls are cor-
rectly connected to the tractor's hydraulic
system. Slowly set the hydraulic valve (5)
- figure (3.7) to the open position.
Before lowering, make sure that the op-
eration is performed on a stable and flat
surface, and pay special attention not to
damage the rear door if it is open.
The lowering of the trailer is activated by
means of a suitable hydraulic lever on the
tractor.
USING SIDE RAILINGS
Side railings are attached to the outer
wall of the trailer. To unfold the side gates
(1), lower the trailer and unlock the cotter
pin (2). Then remove the railing from the
hanger (3) and unfold it sideways in the
desired position.
Open the rear door so that it is as close as
possible to the side railings.
CAUTION
It is forbidden to exceed the trailer's maximum car-
rying capacity as it threatens road safety and may
cause damage to the trailer.
DANGER
Before each use of the trailer, check the condition of
hydraulic circuit hoses.
Before lowering the trailer make sure that there are
no persons or animals behind the trailer or partially
under the trailer.
A
B
614-H.14-1
Figure 4.8 Rear door opening