PRONAR T023, Руководство пользователя

Страница: 59 / 99

SECTION 4 Pronar T023, Pronar T023M
4.13
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Inspect tightness of nuts before the first use of trailer, after the first travel under
load and then every 6 months of use or after 25,000 km, whichever occurs first. In
the event of intensive work, check the nut tightening at least every10,000 km. The
inspection should be repeated individually if a wheel has been removed from the
wheel axle.
•
Regularly check and maintain correct pressure in tyres according to Operator's
Manual (especially if trailer is not used for a longer period).
•
Pressure and tyres should be also checked during the whole day of intensive
work. Please note that higher temperatures could raise tyre pressure by as much
as 1 bar. At high temperatures and pressure, reduce load or speed.
•
Do not release air from warm tyres to adjust the pressure or the tyres will be
underinflated when temperatures return to normal.
•
Tyre valves should be protected with the appropriate caps to avoid soiling.
•
Do not exceed the trailer's maximum design speed.
•
When the trailer is operated all day, stop working for a minimum of one hour in
the afternoon.
•
Adhere to 30 minutes rest for cooling tyres after driving 75 km or after 150
minutes continuous travel depending on which occurs first.
•
Avoid potholes, sudden manoeuvres or high speeds when turning.