PRONAR T023 Скачать руководство пользователя страница 2

Страница: 2 / 99

SYMBOLS APPEARING IN THIS OPERATOR'S MANUAL

Information, descriptions of danger and precautions and also recommendations and prohibitions

associated with user safety instructions are marked:

and also preceded by the word "DANGER”. Failure to observe the instructions may endanger

the machine operator's or other person's health or life.

Particularly important information and instructions, the observance of which is essential, are

distinguished in the text by the sign:

and also preceded by the word "ATTENTION". Failure to observe the instructions may lead to

damage to the machine as a result of improper operation, adjustment or use.

In order to focus the user's attention on the need to perform maintenance, the relevant section

of the Operator's Manual is marked with the pictogram:

Additional tips and advice for machine operation are marked:

and also preceded by the word "TIP".

Содержание T023




































































































Результаты поиска

Содержание T023

Отзывы:

PRONAR T023, Руководство пользователя, Страница: 2 / 99

Результаты поиска

Содержание T023

Отзывы: