PRONAR PUV-3600HD, Руководство оператора

Страница: 49 / 83

SECTION 4 PUV-3600HD / PUV-4000HD
4.11
FIGURE 4.6 Levelling the snow plough body on the loader arm
4.4.2 ADJUSTING THE SNOW PLOUGH WORKING POSITIONS
PUV-3600HD / PUV-4000HD snow plough has four adjustable working positions. In order to
change the snow plough working position use the electric switch and the hydraulic system
manifold lever that controls a relevant section of the external hydraulic system of the carrying
vehicle.
TIP
In order to prolong the life of the solenoid valve coils, the switch should be set in „0” or
„OFF” position (switched off) when the required snow plough position is reached.
Depending on type of control system (independent or independent-simultaneous control), the
snow plough can be equipped with 2-position switch (FIGURE 4.7) or 3- position switch
(FIGURE 4.8)
When the switch is set to „OFF” or „0” position (switched off), a single snow plough blade can
be controlled and when the switch is flipped to „ON” or „I”position (switched on), the other
snow plough blade can be controlled (FIGURE 4.7).
DANGER
The snow plough is controlled from the operator cab.
When snow plough is in use there must be no bystanders near the machine.