PRONAR PUV-3600HD, Руководство оператора

Страница: 23 / 83

SECTION 2 PUV-3600HD / PUV-4000HD
2.5
•
During work, use the proper, close-fitting protective clothing, gloves and
appropriate tools. When working on hydraulic systems it is recommended to use
oil resistant gloves and protective goggles.
•
Any modification to the machine frees PRONAR from any responsibility for
damage or detriment to health which may arise as a result.
•
Before undertaking any work on the machine, turn off carrying vehicle's engine.
•
Regularly check the technical condition of the safety devices and correct
tightening of bolt connections.
•
Regularly perform service inspections of machine as recommended by the
Manufacturer.
•
Do NOT perform service or repair work under raised and unsupported machine.
•
Repair, maintenance and cleaning work should be carried out with the carrying
vehicle's engine turned off and the ignition key removed. Immobilise the carrying
vehicle with parking brake and ensure that unauthorised persons do not have
access to the tractor cab.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the machine and invalidate the warranty.
•
Do NOT weld, drill holes in, cut or heat the main structural elements, which have
a direct impact on the machine operation safety.
•
In the event of work requiring the machine to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the machine, stable and
durable supports must also be used. Do NOT carry out work under a machine,
which has only been raised with the three point linkage or extension arm.
•
The machine must not be supported using fragile elements (bricks or concrete
blocks).
•
After completing work associated with lubrication, remove excess oil or grease.