PRONAR PUV-3600HD, Руководство оператора, Страница: 52 / 83

PUV-3600HD / PUV-4000HD SECTION 4
4.14
4.4.3 SETTING WORKING HEIGHT
The slides or wheels are used in order to maintain a proper distance between the ground and
collecting blades, to reduce thickness of scraped material layer and to limit the depth of blade
sinking into soft ground.
In the snow ploughs equipped with slides (FIGURE 4.9), the height adjustment is performed
by unlocking pin (3) and proper sliding out or sliding in slide (1) mounted in guide (2).
Location of the slide in the guide can be changed every 12 mm using one of the two
openings in the guide. When the height is set, the slides must be secured with a pin (3) and
securing cotter pin (4). Slides of the left and right blade should be put forward at the same
height.
FIGURE 4.9 Working height adjustment in the snow ploughs equipped with slides
(1) - slide, (2) - slide guide (3) - pin, (4) - locking cotter pin
DANGER
Setting the working height should be performed only when the engine is stopped, and
the machine is raised and secured.