PRONAR PT512 Скачать руководство пользователя страница 70

Страница: 70 / 139

Pronar PT512

CHAPTER 4

4.2

4.1

PREPARING FOR WORK BEFORE THE FIRST USE

4.1.1 CHECKING THE TRAILER AFTER DELIVERY

The manufacturer guarantees that the trailer is fully operational and has been checked

according to quality control procedures and is ready for normal use. This does not free the

user from an obligation to check the machine's condition after delivery and before the first

use. The machine is delivered to the user completely assembled.

Before commencing work, the trailer operator must inspect the technical condition of the

trailer and prepare it for the first start-up. Carefully read this Operator's Manual, observe all

its recommendations and understand the machine design and the principle of its operation.

ATTENTION

Before proceeding to hitching the trailer and starting its operation, carefully read this
Operator's Manual and observe all its recommendations.

External inspection

Check completeness of the machine (standard and optional equipment).

Check the condition of protective paint coating.

Inspect the trailer's components for mechanical damage resulting from

incorrect transport (dents, pierced, bent or broken components).

Check the technical condition of tires and tire air pressure.

Check the technical condition of hydraulic flexible lines.

Check the technical condition of pneumatic lines.

Check that there are no hydraulic oil leaks.

Check lamps.

Check all cylinders for hydraulic oil leaks.

4.1.2 PREPARING A TRAILER FOR FIRST HITCHING

Preparation

Содержание PT512












































































































































Результаты поиска

Содержание PT512

Отзывы:

Бренды по названию

Популярные бренды

PRONAR PT512, Руководство оператора

Результаты поиска

Содержание PT512

Отзывы:

Бренды по названию

Популярные бренды