PRONAR PRONAR T700, Руководство оператора

Страница: 69 / 136

SECTION 4 Pronar T700
4.3
4.1.2 PREPARE A TRAILER FOR FIRST HITCHING TO TRACTOR
Preparation
Check all the trailer's lubrication points, lubricate the machine as needed
according to recommendations provided in section 5.6 .
Check if the nuts and bolts fixing the wheels are properly tightened.
Verify the type of system on your tractor and possibly adjust the brake system
of the trailer. If the tractor is equipped with a single conduit brake system, the
trailer's system should be configured for the tractor according to the
instructions in section 5.12.
Drain air tank of the brake system.
Ensure that pneumatic, hydraulic and electric connections in agricultural
tractor are according to the requirements, if not the trailer should not be
hitched to the tractor.
Adjust the height of the drawbar to the tractor hitch
A detailed description can be found in section 5.11.
Test start
If all the above checks have been performed and there is no doubt as to the trailer's good
technical condition, it can be connected to tractor. Start the tractor, check all systems and
conduct test run of trailer without load (no load in load box). It is recommended that the
inspection is conducted by two people, one of which should always remain in the tractor cab.
Test start should be conducted according to the sequence shown below.
Connect trailer to appropriate hitch on agricultural tractor.
Connect brake, electrical and hydraulic system lines.
Switch on individual lights, check correct operation of electrical system.
Switch hydraulic tipping system valve to position 1. Conduct test tipping of
load box backward.
Actuate and check tailgate control system.
When moving off check if the main brakes operate correctly.