VessJBOD 1000 Series Quick Start Guide
8
Figure 7. A 16-bay VessJBOD mounted in a rack with the available rails
To install the VessJBOD unit into a rack with the available mounting rails:
1.
Check the fit of the mounting rails in your rack system.
2.
Adjust the length of the mounting rails as needed.
The rear rail slides inside the front rail. The rail halves are riveted together
and use no adjustment screws.
3.
Attach the mounting rail assemblies to the outside of the rack posts, using
the attaching screws and flange nuts from your rack system.
Be sure the front rail support is on the bottom facing inward.
The alignment pins fit into the rack holes above and below the attaching
screws.
Use the attaching screws and flange nuts from your rack system. Tighten the
screws and flange nuts according to your rack system instructions.
4.
Place the VessJBOD unit onto the rails.
5.
Secure the VessJBOD unit to the rack.
One screw each side, in the upper hole only. Use the attaching screws and
flange nuts from your rack system. Tighten the screws and flange nuts
according to your rack system instructions.
Vertical Rack Post
VessRAID subsystem
Mounting rails mount
outside the rack post
Handles mount
outside the rack post
Содержание VessJBOD 1730
Страница 119: ...手順 1 VessJBOD の開梱 119 図 6 VessJBOD 1830 背面図 LED に関する説明は 130 ページを参照してください I O モジュール 電源装置 外付けファン ...
Страница 138: ...VessJBOD 1000 系列快速啟動指南 138 圖 6 VessJBOD 1830 後視圖 如需 LED 的說明 請參閱第 149 頁 I O 模組 電源供應器 熱抽換風扇 ...
Страница 156: ...VessJBOD 1000 系列快速入门指南 156 图 6 VessJBOD 1830 背面视图 有关 LED 指示灯的描述 请参阅第 167 页 输入 输出模块 电源设备 热交换风 ...
Страница 175: ...작업 1 VessJBOD 포장 풀기 175 그림 6 VessJBOD 1830 후면 모습 LEDs 에 대한 설명은 186 페이지를 참조하십시오 I O 모듈 전원 공급 장치 외부 팬 ...