Quick Installation Guide
3.5 inch Hard Disk Drives
DK31/32CJ-FC
Connector Layout
© The statements in this publication are not intended to create any warranty, expressed
or implied. Specifications and product offerings subject to change without notice.
All product names and logos are trademarks of their respective owners.
For sales information on Hitachi products: 1-800-HITACHI (1-800-448-2244)
Web Site: http://www.hitachi.com/storage
DK31CJ-72
DK32CJ-36
DK32CJ-18
Formatted Capacity*(Gbytes)
73.9
36.9
18.4
Bytes per Sector*
512
512
512
#Cylinders/#Heads/#Disks
15154/24/12
15154/12/6
15154/6/3
Maximum LBA*(Hex)
89B88FF
44DC47F
226E23F
Seektime:Average(Read/Write)(ms)
5.6/6.5
5.2/6.0
5.2/6.0
Spindle Speed rpm
10025
10025
10025
Interface Type
SCSI Ultra
160 SCSI Ultra
160 SCSI Ultra 160
Transfer rate (MB/s)
160 max
160 max
160 max
Operating Temperature (C/F)
5-50°/41-122°F
5-50°/41-122°F
5-50°/41-122°F
Power: 12Vpeak(Typ)/5V peak (Typ) (A)
3.25/1.2
2.2/1.2
2.3/1.2
Start Time(s)
25
25
25
Specifications
Handling Precautions
1. Do not press on the drive. Hold the drive by the sides only, do not apply any
force to the drive during handling or installation
2. Always handle the drive with care to prevent damage from shock, vibration or
electrostatic discharge (ESD). Do not touch the Printed Circuit Board (PCB).
3. Electrostatic Discharge. Static electricity can damage the drive. Before
handling the drive, touch an unpainted metal surface for a few seconds to
drain any static electricity from your body.
4. Keep the original packaging and static-protective bag in case the drive has to
be returned.
Mounting Orientation
1
1. Installation horizontal or vertical ( 6 directions)
2. Provide adequate air flow to cool drive
3. Use 4 mounting screws (6x32 UNC). Maximum screw penetration 3.8mm
(0.15 in) into drive
