Promise Technology Pegasus3 R4 Скачать руководство пользователя страница 219

Страница: 219 / 232

206

Promise

Technology

Pegasus3 R4/R6/R8

If you choose NOT to accept the incomplete array:

1. Click

Cancel

in the incomplete array dialog box.

2. Do one of the following:

• • Delete the array. This action deletes all logical drives on the array.

• • Replace the missing physical drive.

Unreadable Disk Warning

Your Pegasus logical drive displays on the computer’s desktop as a removable-drive icon (right).

If your computer’s operating system recognizes a logical drive but cannot access it, the computer might

display a warning message. See Figure 6.

Warning message

Normally, you never see this warning message for Pegasus3 logical drive because the Pegasus Utility

formats your logical drives automatically.

If the warning message appears, try using the computer’s disk utility to REPAIR the problem logical

drive. For more information, see the utility’s online help or the computer’s

User Manual

If the disk utility cannot repair the logical drive, contact Technical Support for advice and assistance.

See “Contacting Technical Support” on page 212.

Содержание Pegasus3 R4








































































































































































































































Результаты поиска

Содержание Pegasus3 R4

Отзывы:

Promise Technology Pegasus3 R4, Руководство по эксплуатации продукта, Страница: 219 / 232

Результаты поиска

Содержание Pegasus3 R4

Отзывы: