Promise Technology Pegasus3 R4 Скачать руководство пользователя страница 126

Страница: 126 / 232

113

Managing the Pegasus3

Pegasus3 Product Manual

Task 2 – Logical Drive Creation

To create your logical drive:

1. Enter your information and choose your options.

• Enter a logical drive alias in the field provided
•

Choose a RAID level from the dropdown menu.

Note the Max: capacity value. Then enter a capacity value the field provided and choose a

unit of measure from the dropdown menu.

•

Enter a value for Capacity and choose the unit for the value (MB, GB, TB)

•

Choose a Stripe size.

64 KB, 128 KB, 256 KB, 512 KB, and 1 MB are available.

•

Choose a Sector size.

512 B, 1 KB, 2 KB, and 4 KB are available.

•

Choose a Read (cache) Policy.

The choices are Read Cache, Read Ahead (cache), and None.

•

Choose a Write (cache) Policy.

The choices are WriteThru (write through) and WriteBack. Write back requires a Read

Cache or Read Ahead Read Cache Policy.

•

RAID 50 only. Choose the number of axles to use.

•

If you want the Pegasus Utility to format your logical drives, leave the Format box checked.

For additional format options, see “Formatting Your Logical Drives” on page 132.

2. Click the Add button.

The new logical drive appears on the list at the right.

If there is capacity remaining, you can create an additional logical drive.

3. Click the Next button to continue.

The Create Spare Drive screen displays.

Advanced Configuration - Create Logical Drive

Содержание Pegasus3 R4








































































































































































































































Результаты поиска

Содержание Pegasus3 R4

Отзывы:

Promise Technology Pegasus3 R4, Руководство по эксплуатации продукта, Страница: 126 / 232

Результаты поиска

Содержание Pegasus3 R4

Отзывы: