Promise Technology Pegasus3 R4, Руководство по эксплуатации продукта, Страница: 204 / 232

191
Troubleshooting Pegasus3 Product Manual
Drive Carrier LEDs
The Pegasus unit spins up the disk drives sequentially to equalize power draw during start-up. After a
few moments:
• The Power / Status LEDs turn blue.
• The Activity LEDs turn blue if a drive is installed.
The drive carrier Power / Status LEDs report the condition of the physical drives. See the table below.
See “Physical Drive Problems” on page 106 for a discussion of rebuilding and failed physical drives for
more information.
The Locator feature is triggered from the Pegasus Utility. It causes the LEDs to blink orange and blue
for one minute. That action helps you find the specific drive. See “Locating a Physical Drive” on page
197.
Drive Carrier LEDs
State Power /Status Drive Activity
Dark No power No drive in carrier
Steady Blue Power is present Drive is present
Flashing Blue — Activity on drive
Blinking Blue and Orange Locator feature or Drive is rebuilding —
Red Drive error or failure —
Power / Status
Drive Activity
Drive carrier LEDs
Power/Status LEDs blink blue and orange
Locate feature on a drive carrier