Promise Technology Pegasus3 R4 Скачать руководство пользователя страница 128

Страница: 128 / 232

115

Managing the Pegasus3

Pegasus3 Product Manual

Task 4 – Summary

1. Review your choices of disk array, logical drives, and spare drive.

•

To make a change, click the

Back

button to reach the appropriate screen.

•

To accept, click the Submit button.

The disk array, logical drive, and spare drive take a few moments to create.

2. Click the

Finish

button to close the Wizard.

Formatting your Logical Drives

If you left the

Format

box checked under

Task 2 – Logical Drive Creation

, your logical drives are

formatted automatically.

If you UNchecked the

Format

box, you must format your logical drives manually.

When the Pegasus Utility has finished the partition and format operation, new removable-drive icons,

each representing one logical drive, appear on your desktop (right).

When you see the icon, your logical drive is ready to use.

Advanced Configuration - Configuration Summary

Содержание Pegasus3 R4








































































































































































































































Результаты поиска

Содержание Pegasus3 R4

Отзывы:

Promise Technology Pegasus3 R4, Руководство по эксплуатации продукта, Страница: 128 / 232

Результаты поиска

Содержание Pegasus3 R4

Отзывы: