24
Declaration of Conformity for ATEX Machinery
We,
n
ProMinent GmbH
n
Im Schuhmachergewann 5 - 11
n
DE - 69123 Heidelberg, Germany,
hereby declare that the product specified below complies with the relevant
basic health and safety requirements of the Directive, on the basis of its
functional concept and design and in the version distributed by us.
Any modification to the product not approved by us invalidates this decla‐
ration.
Tab. 19: Excerpt from the Declaration of Conformity
Designation of the product:
Metering pump, Sigma product range,
Design for use in areas at risk of explosion
in accordance with the ATEX Directive (2014/34/EU)
Product type:
S2Ba_ _ _ _ _ _ _ _ _ _ _ _ _ _ § $ _ _
with characteristics
§ = "L" or "P" and $ = "1" or "2"
Serial number:
see nameplate on the unit
Relevant directives:
ATEX Directive (2014/34/EC)
Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive
EMC Directive (2014/30/EU)
Harmonised standards applied, in
particular:
EN ISO 80079-36:2016, EN ISO 80079-37:2016,
EN ISO 12100:2010, EN 809:1998 + A1:2009 + AC:2010
EN 61000-6-2:2005 + AC:2005, EN 61000-6-4:2007 + AC:2011
Ex specification of the entire
system:
II 2G Ex h IIC T3 Gb X for $ = "1"
II 2G Ex h IIC T4 Gb X for $ = "2"
X*: max. media temperature 90 °C
Ambient temperature -10 °C ... +40 °C
Date:
16.11.2018
* With regard to “Special conditions” - refer also to the “Safety chapter” -
“Safety information for ATEX designs” - “Special conditions for ATEX”.
You can download the Declaration of Conformity from www.promi‐
nent.com.
The Declarations of Conformity, the EC type-examination certificates and
the operating instructions for the individual components are also enclosed
with the pump.
For pumps with explosion protection:
Declaration of Conformity for ATEX Machinery
83
Содержание Sigma / 2 Basic S2Ba
Страница 87: ...87...
