ProMinent S3Cb, Руководство по эксплуатации

Страница: 57 / 124

You can then use the administration functions to manage the commands -
Ä
Chapter 9.4.2 ‘ ‘Setting the timer’ ’ on page 56
.
Use the
‘Clear all’
function to clear all commands (the program).
Create the command as follows:
1 - Create a command (program line)
2 - Select the triggering event and time
3 - Select the action and value
4 - Check the command
5 - Save command by pressing the Clickwheel
6 - Create the next command if necessary
9.4.2.1 Administration functions for commands
The following administration functions are available to manage the com‐
mands (program lines):
n
‘Display’
(only if commands entered)
n
‘Change’
(only if commands entered)
n
‘Clear’ (only if commands entered)
n
‘New’
Use ‘New’ to create a new command.
9.4.2.2
‘Init’
Initial conditions
Use
‘Init’
to specify initial conditions at the start of the program - see
Ä
Chapter 9.4.2.4 ‘Select the action and value’ on page 58
.
9.4.2.3 Selecting the
‘Time event’
and Time
You can select a time event (cycle) and a time as well:
Time event Time
‘Hourly’
hourly at the x minute
‘Daily (Mon-Sun)’
daily at the time mm.ss, Monday to
Sunday
‘Weekdays1 (Mo-Fr)’
daily at the time mm.ss, Monday to
Friday
‘Weekdays1 (Mo-Sa)’
daily at the time mm.ss, Monday to
Saturday
‘Weekend (Sa+Su)’
daily at the time mm.ss, Saturday
and Sunday
‘Weekly’ weekly at the time mm.ss on the
day dd.
‘Monthly’
weekly at the time mm.ss on the x.
day of the month
Set up / ‘Menu’
57