ProMinent S3Cb, Руководство по эксплуатации

Страница: 46 / 124

The
‘Settings’
menu generally includes these setting menus:
1 - The operating mode set (exception:
‘Manual’
)
2 - ‘Metering’
3 - ‘Calibrate’
4 -
‘Inputs/outputs’
5 -
‘System’
6 -
‘Set time’
7 -
‘Date’
9.3.1
‘Operating mode’
‘Menu / Information
è
Settings
è
Operating mode
è
...’
9.3.1.1
‘Manual’
‘Menu / Information
è
Settings
è
Operating mode
è
Manual’
‘Manual’
operating mode allows you to operate the pump manually.
The stroke rate can be set in the continuous display of this operating
mode.
9.3.1.2
‘Batch’
‘Menu / Information
è
Settings
è
Operating mode
è
Batch
è
...’
The ‘Batch’ operating mode enables you to pre-select large metering vol‐
umes.
You can only select whole numbers but no fractions as the number of
strokes (figures 1 to 99,999).
You can trigger the strokes using the
[Clickwheel]
if you have already
switched to the
‘Push’
continuous display. You can also trigger them via a
pulse using the "External control" terminal.
You can also activate the ‘Memory’ function extension ("memory" identi‐
fier ). When
‘Memory’
is activated, the pump adds up the remaining
strokes, which could not be processed, up to the maximum capacity of the
stroke memory of 99,999 strokes. If this maximum capacity is exceeded,
the pump goes into fault mode.
CAUTION!
–
The pump maintains its stroke rate when changing
over from
‘Manual’
operating mode to
‘Batch’
oper‐
ating mode.
– When you press
[STOP/START]
or the "Pause"
function is activated, the
‘Memory’
is cleared.
9.3.1.3 ‘Contact’
‘Menu / Information
è
Settings
è
Operating mode
è
Contact
è
...’
Memory - remaining strokes not yet pro‐
cessed
Set up / ‘Menu’
46