Motor Screw
Washer
Motor Block
Closemount
Screw
Hook
Canopy
5
ASSEMBLY INSTRUCTIONS
1
3
Mounting
Bracket Screw
2
4
1.Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER:
Failure to disconnect the power supply prior to
installation may result in serious injury or death.
2. Remove the mounting bracket by removing the two
mounting bracket screws from the round holes in the
canopy. Then loosen the other two mounting bracket
screws from the J-slots. Retain the mounting bracket
screws for later. Install the mounting bracket to the
outlet box (not included) using the screws and washers
provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
3. Remove the ten motor screws, washers, and five motor
blocks from the underside of the motor. Discard the
motor blocks and washers but save the motor screws for
blade arm installation.
4.
CLOSEMOUNT INSTALLATION
(Optional) -
a. Remove the three Phillips-head closemount screws from
the top of the motor assembly.
b. Remove the canopy cover from the bottom of the
canopy.
c. Align the holes in the bottom of the canopy with the
screw holes in the top of the motor assembly. The larger
holes in the canopy will encompass the three pre-installed
screws.
d. Secure the canopy to the top of the motor assembly
with the three closemount screws.
e. Hang the fan on the hook of the mounting bracket.
Proceed to Step 9.
Mounting
Bracket
Содержание 50650
Страница 1: ......
