manualshive.com logo in svg

Prometal UNIVERSAL 1000, Руководство по обслуживанию

Поделиться
Скачать
Prometal UNIVERSAL 1000 Скачать руководство пользователя страница 6

           Maintenance manual           Universal-1000

 

 

P R O M E T A L 

 

6 

 

Maintenance manual 

-Preface- 

- This maintenance manual is designed to make it easier for personnel to familiarize 
themselves with the machine/system and to utilize possibilities offered.                                                                   

–

 This manual contains important information on reliable, workmanlike and economical 

operations of the machine/system. By following this manual carefully will help avoid 
accidents, repair costs/downtimes and enhance the reliability/service life of the 
machine/system. 

 

 

 

 

 

 

 

 

                          

- This manual is always to be kept together with the machine/system. 

 

                           

- We recommend careful study of manitenance manual, since we cannot accept any liability 
for damage and malfunctions resulting from non-observance. 

 

 

 

         

- This manual is to be read and put to appropriate use by all persons whose job it is to work 
with the machine/system, e.g. - In case You encounter any problems or if You have any 
question, do not hesitate and contact our technical support. 

© 

All rights reserved, including those of translation into other languages. No part of this 

document may be reproduced in any form (by photocopy, microfilm or any other means, nor 
transmitted or translated into a machine-readable language) without written permission by: 
PROMETAL 

NOTE: 

All technical details in this manual are subject to change without further notice. 

Addresses: 

Milosava Vlajica 49 

11040 Sopot, Belgrade 

Serbia, Europe 

Phone: 

+381 11 8251 625 

+381 11 8251 071 

Fax: 

+381 11 8250 137 

Содержание UNIVERSAL 1000




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды