Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
·
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Printed in USA.
Part# TM300
2/08
Page 15
(iii) Setting the Maxwell
®
16 Instrument Operational Mode
(iv) Changing the Maxwell
®
16 Instrument Display Language
1.
Go to the “Menu” screen. The instrument will default to the Menu screen at start-up.
2.
Select “Setup”. This will open the language screen.
3.
Scroll up or down and select the language required.
4.
Once the language is selected press “Run/Stop”, and then return to Menu. The display should now be
in your selected language.
1. Make sure the instrument door is closed and turn on the Maxwell
®
16 Instrument. The screen will
display both the firmware version number and the current operational mode setting.
The Maxwell
®
16
Instrument (Cat.# AS2050) is supplied configured for use in clinical mode with SEV hardware.
2. Verify that the operational mode is displayed as shown in the
image on the right. If the operational mode is not as shown
here, you will need to change the instrument setting (see
Appendix II, Section VIII.A(ii) “
Changing the Maxwell
®
16
Instrument Operational Mode”
).
Compliance with Directive 98/79/EC on in vitro diagnostic
medical devices has not been demonstrated for use of the
Maxwell
®
16 Instrument with reagent kits other than
Cat.# AS1015, or with methods other than those provided in
the clinical mode.
60
33
MD
Promega MAXWELL 16
Purification System
Version 4.40
SEV
IVD
Operational Mode Setting
SEV = Standard Elution Volume
IVD = Clinical Mode
!
tm300.0208_Corrected.qxp 3/11/2008 10:41 AM Page 15
