Promaker PRO-TZ2400, Руководство пользователя

Страница: 6 / 32

6
should any electrical component
fail to perform properly, shut off the
power switch, remove the machine
plug from the power source and
have damaged, missing, or failed
parts replaced before resuming
operation.
• MAKE SURE THE CUT-OFF
WHEEL IS SECURELY MOUNTED
as described in the operating
instructions before connecting
the tool to a power supply. Do not
tighten wheel excessively, since this
can cause cracks.
• CHECK THE WHEEL FOR
FISSURES AND CRACKS, and test
for normal operation prior to use.
• ONLY USE A CUT-OFF WHEEL
RATED FOR 3600rpm OR
GREATER. Always store wheels in
a dryplace with little temperature
variation.
• ALWAYS EASE THE ABRASIVE
WHEEL AGAINST THE WORK
PIECE when starting to cut. A harsh
impact can break the wheel.
• BEFORE CUTTING, press the
trigger switch and allow the cut-off
wheel to reach full speed before
cutting.
• MAKE SURE THE WORK AREA
HAS AMPLE LIGHTING to see the
work and that no obstructions will
interfere with safe operation
BEFORE performing any work using
your cut-off machine.
• DO NOT OPERATE THIS TOOL
WHILE UNDER THE INFLUENCE
OF DRUGS, ALCOHOL, OR ANY
MEDICATION.
• ALWAYS STAY ALERT! Do
not allow familiarity (gained
from frequent use of your cut-
off machine) to cause a careless
mistake. ALWAYS REMEMBER that
a careless fraction of a second is
sufficient to inflict severe injury.
• STAY ALERT AND EXERCISE
CONTROL. Watch what you are
doing and use common sense. Do
not operate tool when you are tired.
Do not rush.
• SAVE THESE INSTRUCTIONS.
Refer to them frequently and use
them to instruct other users. If you
loan someone this tool, loan them
these instructions also.
PRODUCT SPECIFICATIONS
Technical Specifications
Voltage/
Frequency
120V/
60Hz
Power 2400W
Speed 3600rpm
Grinding Disc
Diameter
14”(355mm)
Weight 30.6Lbs
Cord 2m