Promaker PRO-TZ2400, Руководство пользователя

Страница: 10 / 32

10
the wheel. Select another wheel.
• Clean debris from the inner washer
and inner flange.
• Place new wheel over spacer, then
place both on wheel arbor against
inner flange.
• Clean outer flange, then align flats
with flats on wheel arbor and slide it
onto arbor until it is flushed against
wheel.
• Place recessed side of outer
washer against arbor, then insert
wheel bolt into threaded end of
wheel arbor.
• Start threads and turn bolt
clockwise to snugly tighten.
• Pull the spindle lock button and
rotate bolt until spindle being locked.
This will prevent shaft from rotating.
• Using the wrench provided,
securely tighten wheel bolt.
Note: Bolt has right hand threads.
Turn bolt clockwise to tighten.
WARNING
Do not overtighten wheel bolt.
Overtightening can cause the new
wheel to crack, resulting in
premature failure and possible
serious personal injury.
PROTECTION GUARD
• In order to avoid spark splashing,
under the operational condition,
loose the screw and adjust angle of
the protection guard.
ADJUSTABLE FENCE (Fig. 4)
• The adjustable fence is located at
the rear of your cut-off machine. It
is used along with the vice clamp to
provide a clamp for holding your
workpiece securely when making
cuts. It also makes your cut-off
machine more versatile. The fence
can be rotated to obtain cutting
angles from 0° to 45° (L&R). It
can also be moved back to allow
greater cutting widths in thin stock,
or moved forward to allow greater
cutting depths in tall or thick stock.+
CUTTING ANGLE ADJUSTMENT
(Fig. 4)
• Unplug your cut-off machine.
WARNING
Failure to unplug cut-off machine
could result in accidental starting
causing possible serious
personal injury.
• Loosen the fence quick lock, by
using the wrench supplied. Then
loosen the fence bolt to secure the
adjustable fence.
• Rotate fence until the desired
angle of cut on the scale is aligned
with the indicator in machine base.
• For precise cuts, check the angle
of cut for the fence against the
abrasive wheel with a protractor,
bevel square, or other similar device.
• Tighten the fence quick lock, by
using the wrench supplied, then
securely tighten fence bolt. Return
wrench to its storage area in the
base.
• This will secure the fence in place
at desired angle.