14
Set I/O Pin Status command
Command format:
PS
xs
, where
x
is the I/O line number and
s
is
the desired status of the I/O line (0 or 1)
Possible replies:
A, C, D, R
Example (VB6 Code):
Set the Status of Pin 0 to Low,
which the WEC200 IP is
192.168.100.216
Winsock1.RemoteHost =
“192.168.100.216”
Winsock1.SendData =
“PS01”
Note:
1. For more details, please refer to the on-line help file of DS Manager tibbo_docs.chm on [Set
I/O Pin Status (Sx) instruction] section.
7-B. Reply Codes
Listed below are all available reply codes:
C. RC
Description
A
OK
(command completed successfully)
C
Error
(incorrect command was issued)
R
Rejected
(command was rejected by the DS)
D
Denied
(access was denied by the DS)
F
Failed
(command execution failed)