
13
Assign new IP-address command
Command format:
B.
A
mmm.mmm.mmm.mmm.mmm.mmm/pp...p/iii.iii.iii.ii
Where
mmm.mmm.mmm.mmm.mmm.mmm
- MAC-address of
the target DS
pp...p
- password (defined by the
Password (PW) setting
)
m
- fixed to 'N' (means that the application firmware, not
the NetLoader is running)
iii.iii.iii.iii
- new IP-address to be assigned to the DS
Possible replies:
A
,
D
,
C
,
F
(see Reply Code section)
Example (VB6 Code):
Change the IP of MAC
(0.2.3.5.0.62) to
192.168.100.216
Winsock1.RemoteHost =
“255.255.255.255”
Winsock1.SendData = _
“A0.2.3.5.0.62//192.168.100.216”
Note:
1. This is a broadcasts command, so the remote host IP needs to be set to
“255.255.255.255”.
2. The default password is blank.
3. For more details, please refer to the on-line help file of DS Manager tibbo_docs.chm on
[Assign IP-address (A) command] section.
Get I/O Pin Status command
Command format:
PG
x
, where
x
is the I/O line number
Possible replies:
A
s
, C, D, R,
where
s
is the state of I/O line (0 or
1)
Example (VB6 Code):
Get the Status of Pin 0, which
the WEC200 IP is
192.168.100.216
Winsock1.RemoteHost =
“192.168.100.216”
Winsock1.SendData =
“PG0”
Note:
1. For more details, please refer to the on-line help file of DS Manager tibbo_docs.chm on [Get
I/O Pin Status (Gx) instruction] section.