Promac 323BF-BP, Руководство пользователя

Страница: 22 / 24

Importance Notice For CE
Handling of
Sande
r
OPERATION.
MAINTNANCE:
Environment Requirements for Installatin.
Electrical Connection/Disconnection & Operation.
2.
3.
Electrical disconnection:
2.1.The disconnection is carried out by hand-operated disconnecting device.
2.2.Be sure to disconnect this machine from power source, when you want to stop the job, maintenan-
ce, and adjustment.
Grounding.
The grounding of the
sande
r is carried out by connecting the Yellow/green terminal of
supply cable to the grounding terminal of power source. Be sure to ground your machine before
connecting machine to power source in any situation.
1. The net weight of this machine is about
36
kgs including stand, it is better to handle and transport
with the help of lifting tools.
2.The total weight of machine must be ensured before handling.
1.Be sure to provide sufficient light for operation according to the codes or regulations published for
localarea.
2.If you do not get the information about lighting, a lighting intensity of 300 LUX is the least of value
to be supplied.
FOR THREE PHASE
1. Electrical connection:
1.1.A cable with four wires is equipped to connect your machine into the 3 phase power supply.
Please connect your machine into the power supply with hand-operated discon-
necting device
, which is in compliance with subclause 5.3 of EN60204-1, such as no fuse break-
er or plug/socket combination.
1.2.For the protection of control device, we recommend the operator to supply
a fuse with 6A.
current rating of fuse, and the total length between fuse and connection terminal shall not
exceed 1.5 m.
1.3.The
exact power source voltage, frequency, and number of phase shall be checked
according to the installation diagram and circuit diagram.
1.4.
The correct direction of grinder should be checked after connecting.
1. "START" : Push the button marked with "
I
".
2. "STOP" : Push the button marked with "
0
" .
1. Be sure to disconnect the machine from the power source.
2. If motor being overload, the overload relay will be active.
3. It is an automatic recovery type. The motor is liable to be restarted if overlord relay is cooled down
automatically.
WARNING!
Do not disconnect grounding terminal before disconnecting power source.