6
English
Setting the clock
1. Hold in [ TIME ] for 2 seconds, “24 Hr” flashes. Press [
▲
] or [
▼
] to select 12- or
24-hour time format.
2. Press [ TIME ] again – the hour digits will flash. Set the hours using the up and down
buttons, [
▼
] and [
▲
]. Press and hold [
▲
] or [
▼
] to make the setting quicker.
3. Press [ TIME ] again – the minute digits will flash. Set the minutes using the up and
down buttons, [
▼
] and [
▲
]. Press and hold [
▲
] or [
▼
] to make the setting quicker.
4. Press [ TIME ] again to exit the settings mode and display the time. If no button
is pressed within 10 seconds, the settings mode will automatically be exited and
the time will appear in the display.
Note:
When 12-hour time format is selected, the “P” icon will appear on the display
to indicate PM. There is no AM indicator.
Setting the humidity alert levels
The symbol and a value are displayed to warn you if the relative humidity rises
above or drops below the set alert levels.
1. To set the upper level: Hold in [ ALERT/ON•OFF ] until the humidity value and
for channel 1 flash (95% is the default factory setting). Use [
▲
] or [
▼
] to change
the value.
2. To set the lower level: Hold in [ ALERT/ON•OFF ] until the humidity value and
for
channel 1 flash. Press [ ALERT/ON•OFF ]. The humidity value and for channel
1 flash (20% is the default factory setting). Use [
▲
] or [
▼
] to change the value.
3. Hold in and press [ ALERT/ON•OFF ]. Skip over the settings for channel 1 and
input the settings for any extra transmitters on channel 2 and 3.
Once all the settings have been made the display automatically reverts to normal
display mode if none of the buttons is pressed.
Turning humidity level alert on/off
In the time display mode:
1. Press [ ALERT/ON•OFF ] twice to turn on the alert for channel 1.
2. Press [ ALERT/ON•OFF ] once more to turn on the alert for channel 2.
3. Press [ ALERT/ON•OFF ] once more to turn on the alert for channel 3.
4. Press [ ALERT/ON•OFF ] once more to turn on the alert for all channels.
5. Press [ ALERT/ON•OFF ] once more to turn off the alert for all channels.
In channel 1, 2 and 3 display mode:
1. Press [ ALERT/ON•OFF ] once to turn on the alert for channel 1.
2. Press [ ALERT/ON•OFF ] once more to turn on the alert for channel 2.
3. Press [ ALERT/ON•OFF ] once more to turn on the alert for channel 3.
4. Press [ ALERT/ON•OFF ] once more to turn on the alert for all channels.
5. Press [ ALERT/ON•OFF ] once more to turn off the alert for all channels.
