4
English
Display modes
If more than one outdoor sensor is connected to the main unit at Channel 2 or 3, two
display modes will be avaliable for selection. Press [
▲/
/CHANNEL ] to toggle between:
• Time display mode: Temp/humidity from sensor on channel 1,
indoor temp/humidity, time.
• Channel 1, 2 and/or 3 display mode: Temp/humidity from sensors on channels
1, 2 and/or 3.
Location
Both the main unit and the outdoor sensor can be used
either freestanding or mounted on a wall.
Press the included wall bracket/table stand into
the corresponding mounting holes.
Main unit
• The main unit has integrated temperature and moisture sensors.
• Be careful when placing the unit so that it is not located near heaters,
cookers, or other heat sources.
Outdoor sensor and transmitter
• The external temperature and humidity sensors send readings of outdoor readings
back to the main unit.
• The probe measures the temperature and the transmitter measures the humidity.
• To measure outdoor temperature and humidity readings, both the probe and
transmitter must be placed outside.
• During extreme cold temperatures, the transmitter is recommended to be placed
indoors due to the risk of battery failure. The probe however can be threaded
through a window sill and gently closed. Remember though that your humidity
readings will then be inaccurate as indoor humidity levels are measured, rather
than outdoor readings.
