Air/Q 1100 Avian User Guide
© 2010 Prolitec, Inc.
Installation: Diffusion Director
14. Connect the DC power cord (P/N 9100 with 9122) to
both the appliance and the control box. Bind up any
extra slack in the cord. (Fig. 28)
15. Install a cord raceway (P/N 10607) to enclose the cord
between the appliance and the outlet, and the control
box and the outlet. For instructions on installing the
raceway, see pages 12-13.
16. Plug in both the appliance and the control box. Turn
on appliance. Press the “+” to set the intensity level.
Temporarily disconnect the black injector hose from
the metal injector conduit. Verify that appliance is
pluming correctly. Also, check to make sure that the
fan is running. This can be done by holding your hand
below the fan and feeling for air flow. Reconnect the
black injector hose. (Fig. 29)
21
Fig. 29
