Air/Q 1100 Avian User Guide
© 2010 Prolitec, Inc.
Installation: Diffusion Director
*Additional five-foot duct sections with mounting hardware can be ordered under part number KIT1100DUCT.
B. Diffusion Director Pre-installation Checklist
1. Confirm the area to be targeted for air treatment.
2. Find and mark the exact location for the appliance. Verify that there is sufficient clearance above the
appliance to install the diffusion director.
3. The power cord for the appliance is 6’ long, and the cord for the control box is 8’ long. The height at
which the appliance and the control box are mounted should be planned so they can be plugged in to a
local wall outlet. The appliance requires 110/220 VAC.
C. Appliance Positioning
It is important to find a location that can be serviced and yet as close as possible to the roosting area. The
closer you get to the roosting area, the less Avian Plus will be required per cubic foot.
D. Appliance Installation
1. The appliance is wall-mounted. Place the appliance onto the desired location on the wall and ensure
that it is level.
2. Fasten the appliance to the wall using necessary screws.
3. Connect the power cord to a junction box or attach an AC plug to the cord and connect to a nearby
outlet. Open the enclosure door and unscrew the aluminum cap of the waterproof collar located on top
of the appliance enclosure. Remove and set aside the grommet (Fig. 1 on p. 11).
4. Assemble hose and hose connector together (Fig. 2 on p. 11). Be sure to leave approximately 1/8 of an
inch clearance between the top of the cartridge hose connector and the end of the hose. Then secure
with clamp, ensuring that the hose connector is still free to rotate.
5. From the inside of the enclosure, slide hose assembly upward through to the waterproof collar (Fig. 1
on p. 11).
6. Lube the inside of the grommet if needed to allow the Injector hose to easily slide through. Leave ap-
proximately 2 inches of hose length inside the appliance to provide enough play when replacing the
cartridge. Tighten aluminum cap of waterproof collar to ensure a watertight seal.
17
