CONVERSION FROM NATURAL GAS TO LPG
Important
The replacement / conversion of the gas hob should only be undertaken by a
competent person.
It is important to note that this model is designed for use with natural gas but
can be converted for use with butane or propane gas providing the correct
injectors are fitted and the gas rate is adjusted to suit.
Method
Ensure that the control knobs are in the
position.
Cut off the gas supply and disconnect the hob from the mains socket.
Remove all pan supports, burner caps, crowns and control knobs.
With a 7mm box spanner (not supplied), unscrew the burner injectors and
replace them with the
appropriate LPG injectors.
To adjust the gas rate
With a thin bladed screwdriver (not supplied), completely tighten down the
by-pass adjustment screw.
OPERATION
Switching On a Burner
Black circle: gas off
Large flame: maximum power setting
Small flame: minimum power setting
11
