This appliance is to be built into a kitchen unit or 600 mm worktop, providing
the following minimum distances are allowed:
The edges of the hob must be a minimum distance of 60 mm from a side or
rear wall.
700mm between the highest point of the hob surface (including the burners)
and the underside of
any horizontal surface directly above it.
400mm between the hob surfaces, providing that the underside of the
horizontal surface is in line with the outer edge of the hob. If the underside of
the horizontal surface is lower than 400mm, then it must be
at least
50mm
away from the outer edges of the hob.
50mm clearance around the appliance and between the hob surface and any
combustible surface.
You must have a gap of at least 25mm and at most 74 mm between the
underneath of the appliance
and any surface that is below it.
A minimum disatance of 200mm must be left between the side edges of the
hob and any adjacent cabinet or wall.
min. 25 mm
max. 74 mm
Positioning
7
CLEARANCES REQUIRED
WHEN FITTING THE HOB
WITH A COOKER HOOD
ABOVE
400mm
4
mm
400mm
700mm
0mm
Min.
60mm
20
560mm
600mm
80
50mm
