21
SLASH
3.12 RESET FUNCTION
With this function you can reset the device via the control board. You can select the different reset func-
tions through UP/DOWN button.
1. Press the MODE button to enter the main menu and scroll with UP/DOWN button to select
RESET FUNCTION
and then press ENTER button.
2. Use UP/DOWN button to select:
RESET ALL - RESET PAN/TILT - RESET COLOR - RESET GOBO - RESET ELSE
.
3. Press ENTER button to confirm the selection.
4. Press the MODE button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
3.13 FIXTURE TEST
1. Press the MODE button to enter the main menu and scroll using UP/DOWN to select
ADJUST
, and then
press ENTER button.
2. Use UP/DOWN button to select:
TEST CHANNEL - REGULATE VALUE
.
3. Press ENTER button to confirm the selection.
4. Press the MODE button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
TEST CHANNEL -
[TEST CHANNEL]
-
•
In
TEST CHANNEL
mode you can check the correct operation of the projector selecting the desired
function.
REGULATE VALUE -
[REGULATE VALUE]
-
•
REGULATE VALUE
mode allows you to adjust effects from the control panel to obtain perfect uniformity
between the projectors.
NOTE - To set the value of the functions you need to enter a password.
