9
SLASH
2.3 MOUNTING
The SLASH may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the
unit can also be mounted upside down to a cross arm. The base plate is shown in fig.5.
For fixing, stable mounting clips are required. According to the figure, the bolts of the brackets are placed
into the openings provided in the base plate and turned clockwise until they lock (to the stop).
The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s
weight.
When carrying out any installation, always comply scrupulously with all the regulations (particularly re-
garding safety) currently in force in the country in which the fixture’s being used.
Always additionally secure the projector with the safety rope from falling down.
For this purpose, fasten the safety rope at a suitable position so that the maximum fall of the projector
will be 20 cm.
Fig.5
PLATE
SAFETY
CABLE
OMEGA
BRACKETS
