19
SLASH
3.9 INFORMATION
1. Press the MODE button to enter the main menu and scroll using UP/DOWN button to select
INFORMATION
,
and then press ENTER button.
2. Use UP/DOWN button to select:
TIME INFORMATION - TEMP.INFORMATION - PRODUCT INFO
.
3. Press ENTER button to confirm the selection.
4. Press the MODE button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Time information -
[TIME INFORMATION]
-
•
In the
TIME INFORMATION
mode you can display the current time, the total time and you can clear last
run time og the fixture.
•
Use UP/DOWN button to select:
Current time - Total Run Time - Clear Fixture Time
.
•
Press ENTER button to confirm the selection.
•
Press UP/DOWN button to select
ON
or
OFF
to enable or disable the function.
Temperature information -
[TEMP. INFORMATION]
-
•
In the
TEMP. INFORMATION
mode you can display the temperature of the projector.
•
Press UP/DOWN button to select
ON
or
OFF
to enable or disable the function.
Product information -
[PRODUCT INFO]
-
•
Through the
PRODUCT INFO
function you can display the software version of the device and the unit
model.
3.10 LAMP SETTINGS
1. Press MODE button to enter the main menu and scroll with UP/DOWN button to select
LAMP CONTROL
,
then press ENTER button.
2. Use UP/DOWN button to select:
SWITCH LAMP - POWER ON LIGHT - LIGHT BY DMX - LAMP ON DELAY
.
3. Press ENTER button to confirm the selection.
4. Press the MODE button to go back or wait some seconds for automatic exit from the menu.
Switch lamp -
[SWITCH LAMP]
-
•
In the
SWITCH LAMP
mode you can turn on/off the lamp from the control panel.
•
Press UP/DOWN button to select
ON
or
OFF
.
Power on light -
[POWER ON LIGHT]
-
•
In the
POWER ON LIGHT
mode you can set lamp state while the unit is power on.
•
Press UP/DOWN button to select
ON
or
OFF
to enable or disable the function.
Light by DMX -
[LIGHT BY DMX]
-
•
In the
LIGHT BY DMX
mode, it is possible to set the lighting lamp when DMX signal is found.
•
Press UP/DOWN button to select
ON
or
OFF
to enable or disable the function.
Lamp on delay -
[LAMP ON DELAY]
-
•
In the
LIGHT BY DMX
mode, it is possible to set the delay time between power on and lamp on.
•
Press UP/DOWN to select the desired value (
05M-59M)
.
